TC Plastic Pallets: Completely closed plastic pallets

Craemer’s TC fully closed hygiene plastic pallets are ideally suited for heavy-duty loads and prove their worth in all areas where permanent protection against moisture is essential. For absolute reliable load securing, all models within the TC range are available with a full-surface Palgrip® anti-slip deck.

The patented Craemer welding seam geometry sets this pallet type apart from the rest of the closed plastic pallets market. Its high-strength welds and innovative honeycomb structure make Craemer TC pallets exceptionally resistant to impact. It is ideal for clean room applications in the pharmaceutical or food industries and ideally suited for heavy duty loads.

Features*1

  • Dimensions in inches*2: 47.6 x 39.7 x 6.3 (in mm: 1208 x 1008 x 160)
  • Manufactured from pure PE, one-piece design
  • Flat and solid deck style: Totally Closed – permanently completely closed plastic pallet
  • Four-way entry, tapered entry and exit edges
  • 3 or 5-runner, unwelded with chamfered openings on both sides of the runners
  • Hygienic pallet with high resistance to damage thanks to solid wall thickness
  • Rackable and stackable closed pallet
  • Full-surface Palgrip® anti-slip deck

TC plastic pallet with Palgrip® anti-slip deck

39.7 inches (1000 mm) side and 47.6 inches (1200 mm) side of the TC3-5 pallet

Underside of the completely closed plastic pallet

 Download
Datasheet
Load capacities*4Loading quantities |
Approx. no.
staticdynamicin racking system
TC3-5 Palgrip®
87039899
- light grey 
16500 lbs
(7500 kg)
3300 lbs
(1500 kg)
2800 lbs
(1250 kg)
Container 40’
High Cube: 360

Dry Van: 448

TC3-5 Palgrip®
87038895
- light grey
- 5 reinforcement rods

16500 lbs
(7500 kg)
4400 lbs
(2000 kg)
4400 lbs
(2000 kg)

*1 All technical data include characteristic features, which have been tested under specially defined conditions. Varying data may result from different conditions of usage such as loading method, prevailing temperature and length of storage time. All data and specified information are subject to change without notice. Our service team is pleased to be at your disposal to check the special requirements of your individual application.

*2 All measurements and weight indications are conversion values derived from the original metric values. The possible range of tolerance can be found in the technical drawing. All tolerances are within the accepted tolerance range as specified in the respective DIN norm. If you require more information on our tolerances please contact our sales team.

*3 Our service team is pleased to be at your disposal if you require exact information about material compositions.

*4 Static load: resistance to pressure on a flat ground surface and an evenly distributed load at a room temperature of approx. 68 °F (20 °C).
Dynamic load: on a forklift with an evenly distributed load at a room temperature of approx. 68 °F (20 °C).
In racking system: evenly distributed load along the longitudinal sides. Resting on two supports for over 100 h at a room temperature of approx. 68 °F (20 °C).

Last updated on September 2021