L Plastic Pallets: The ideal load carrier for use in intralogistics

 

The L3 plastic pallet is the ideal load carrier for use in intralogistics. This plastic pallet effectively handles a high load capacity of up to 2.000 kg in high rack. Thanks to a standard fitting with Palgrip® anti-slip strips on the top deck, the load is safely stored on this pallet - even in inclined position. The constant high quality despite increasing circles makes the pallet highly economical, it remains error- and maintenance-free. The closed Palgrip® anti-slip runners of the L3 plastic pallet enable smooth running on all standard conveyor elements in intralogistics processes.

Features*1

  • Dimensions in inches*2: 47.2 x 39.3 x 5.7 (in mm: 1208 x 1008 x 160)
  • Manufactured from pure HDPE, one-piece design
  • 3 runners, welded with chamfered openings on both sides of the runners
  • Four-way entry, tapered entry and exit edges
  • 0.20 inches (5 mm) lips for secure transportation
  • 5 Corrosion-protected reinforcement profiles, for a load capacity of 2200 lbs in high rack
  • Palgrip® anti-slip strips on the top deck and Palgrip® anti-slip runners
  • Easy to clean, without recesses
  • Rackable and stackable plastic pallet
  • Sturdy, dimensionally stable, durable multi-use plastic pallet

 


Download
Datasheet
Load capacities*4 Loading quantities |
Approx. no.
static dynamic in racking system
L3
83341881
light grey / light blue with lips
and 5 reinforcement rods
16500 lbs
(75000 kg)
4400 lbs
(2000 kg)
4400 lbs
(2000 kg)
20' container (pcs): 140

40' high cube container (pcs): 340
L3
83349881
basalt grey / light blue with lips
and 5 reinforcement rods
11000 lbs
(5000 kg)
2750 lbs
(1250 kg)
2200 lbs
(1000 kg)

*1 All technical data include characteristic features, which have been tested under specially defined conditions. Varying data may result from different conditions of usage such as loading method, prevailing temperature and length of storage time. All data and specified information are subject to change without notice. Our service team is pleased to be at your disposal to check the special requirements of your individual application.
*2 All measurements and weight indications are conversion values derived from the original metric values. The possible range of tolerance can be found in the technical drawing. All tolerances are within the accepted tolerance range as specified in the respective DIN norm. If you require more information on our tolerances please contact our sales team.
*3 Our service team is pleased to be at your disposal if you require exact information about material compositions.
*4 Static load: resistance to pressure on a flat ground surface and an evenly distributed load at a room temperature of approx. 68 °F (20 °C).
Dynamic load: on a forklift with an evenly distributed load at a room temperature of approx. 68 °F (20 °C).
In racking system: evenly distributed load along the longitudinal sides. Resting on two supports for over 100 h at a room temperature of approx. 68 °F (20 °C).
The variation among load capacity test results is higher for pallets made of regranulated material than it is for pallets made of virgin material.

Last updated on August 2020