D Plastic Pallets: The economical alternative to wooden pallets

Craemer’s D plastic pallets are extremely versatile. All the economic advantages of wooden pallets are supplemented by flexible, retrofitable reinforcement rods. The 3 or 5-runner plastic pallets are suited for all kinds of use throughout the logistics industry, including many applications in non-food areas.

D plastic pallets are durable, lightweight but with high load capacity, and are easy to clean because they have no recesses. They retain their shape and dimensions and have a very long service life.


  • Dimensions in inches*2: 47.6 x 39.6 x 6.0  (in mm: 1208 x 1008 x 150)
  • Manufactured from pure HDPE, one-piece design
  • 3 or 5 runners, unwelded
  • Four-way entry, tapered entry and exit edges
  • Lightweight plastic pallet with 4 retrofitable reinforcement rods
  • 0.30 inches (7 mm) lip for maximum load safety
  • Ideal for KLT, Galia applications
  • Flow-through, cleanable and hygienic design: Easy to clean, without recesses
  • Rackable and stackable, light weight, recycled plastic pallet
  • Ventilated deck style

Corrosion-protected steel reinforcement rods can be optionally integrated

39.6 inches (1008 mm) side and 47.6 inches (1208 mm) side of the D3-5 ECO plastic pallet

Lightweight plastic pallet with ventilated deck style without recesses

Load capacities*4Loading quantities |
Approx. no.
staticdynamicin racking system
D3-5 ECO
black with lips
and 4 reinforcement rods
11000 lbs
(5000 kg)
3300 lbs
(1500 kg)
2750 lbs
(1250 kg)
20' container (pcs): 140

40' high cube container (pcs): 365

*1 All technical data include characteristic features, which have been tested under specially defined conditions. Varying data may result from different

conditions of usage such as loading method, prevailing temperature and length of storage time. All data and specified information are subject to change

without notice. Our service team is pleased to be at your disposal to check the special requirements of your individual application.

*2 All measurements and weight indications are conversion values derived from the original metric values. The possible range of tolerance can be found in

the technical drawing. All tolerances are within the accepted tolerance range as specified in the respective DIN norm. If you require more information on

our tolerances please contact our sales team.

*3 Our service team is pleased to be at your disposal if you require exact information about material compositions.

*4 Static load: resistance to pressure on a flat ground surface and an evenly distributed load at a room temperature of approx. 68 °F (20 °C).

Dynamic load: on a forklift with an evenly distributed load at a room temperature of approx. 68 °F (20 °C).

In racking system: evenly distributed load along the longitudinal sides. Resting on two supports for over 100 h at a room temperature of approx. 68 °F (20 °C).

The variation among load capacity test results is higher for pallets made of regranulated material than it is for pallets made of virgin material.

Last updated on August 2020